|
System Memory Features The board has two DIMM sockets and supports the following memory features:
- 1.8 V DDR2 SDRAM DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR2 SDRAM DIMMs
- Dual channel interleaved mode support
- Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported.
- 4 GB maximum total system memory.
- Minimum total system memory: 512 MB
- Non-ECC DIMMs
- Serial Presence Detect
- DDR2 667 MHz or DDR2 800 MHz SDRAM DIMMs
- DDR2 667 MHz DIMMs with SPD timings of only 5-5-5 (tCL-tRCD-tRP)
- DDR2 800 MHz DIMMs with SPD timings of only 5-5-5 or 6-6-6 (tCL-tRCD-tRP)
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This enables the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.
Supported Memory Configurations
| DIMM Type |
SDRAM Technology |
Smallest usable DIMM (one x16 Single-sided DIMM) |
Largest usable DIMM (one x8 Double-sided DIMM) |
Maximum capacity with two identical x8 double-sided DIMMs |
| DDR2 667 |
512 Mbit |
256 MB |
1 GB |
4 GB |
| DDR2 800 |
512 Mbit |
256 MB |
1 GB |
4 GB | | Tested Memory
3rd Party Tested Memory* 3rd party tested memory occurs as requested by the memory vendors and is tested at an independent memory house that is not a part of Intel® - Computer Memory Test Labs (CMTL).
Vendor Self Tested Memory Intel supplies the memory vendors that participate in this program with a common memory test plan to use as a basic checkout of the memory stability. Memory listed here was either tested by the memory vendor or by Intel using this test plan. These part numbers may not be readily available throughout the product life cycle.
The table below lists parts which passed testing conducted using Intel's Self Test program for Intel® Desktop Board DG43NB.
| Module Supplier / Module Part Number |
Module Size |
Module Speed (Mhz) |
ECC or Non-ECC? |
DIMM Organization |
Module Date Code |
Component Used / Comp Part Number |
| Aeneon* AET760UD00-25D |
1 GB |
800 |
Non-ECC |
DS x 8 |
0749 |
Aeneon AET93R25D |
| Corsair* CM2X1024-6400 G |
1 GB |
800 |
Non-ECC |
DS x 8 |
07301474-0 |
|
| Elixir* M2Y1G64TU8HB4B-3C |
1 GB |
667 |
Non-ECC |
DS x 8 |
0805.SG |
Elixir N2TU51280BE-3C |
| Elixir M2Y51264TU88A2B-3C |
512 MB |
667 |
Non-ECC |
SS x 8 |
0707 |
Elixir N2TU51280AE-3C |
| Elixir M2Y51264TU88B4B-25C |
512 MB |
800 |
Non-ECC |
SS x 8 |
0713 |
Elixir N2TU51280BE-25C |
| Elixir M2Y51264TU88BOB-25C |
512 MB |
800 |
Non-ECC |
SS x 8 |
0649 |
Elixir N2TU51280BE-25C |
| Elpida* EBE11UD8AEFA-6E-E |
1 GB |
667 |
Non-ECC |
DS x 8 |
0516 |
Elpida E5108AE-6E-E |
| Infineon* HYS64T32000HU-2.5-B |
256 MB |
800 |
Non-ECC |
SS x 4 |
0620 |
Infineon HYB181512160BF-2.5 |
| Infineon HYS64T64000HU-3S-A |
512 MB |
667 |
Non-ECC |
SS x 8 |
|
Infineon HYB181512 800AF3S |
| Kingmax* KLCC28F-A8KB5 |
512 MB |
667 |
Non-ECC |
SS x 8 |
0631 |
Kingmax KKEA88B4IAUG-29XX |
| Kingmax KLDC28F-A8KB5 |
512 MB |
800 |
Non-ECC |
SS x 8 |
0714 |
Kingmax KKEA88B4LZUG-25DF |
| Kingston* KVR667D2N5/1G |
1 GB |
667 |
Non-ECC |
DS x 8 |
BSMH1670776 |
Hynix HY5PS12B21C |
| Kingston KVR800D2N5/1G-SP |
1 GB |
800 |
Non-ECC |
SS x 8 |
BSMH1630668 |
STARRAM* 128MX8T2 |
| Kingston KVR667D2N5/2G |
2 GB |
667 |
Non-ECC |
SS x 8 |
BKME1640819 |
Elpida E1108ACBG-6E-E |
| Kingston KVR667D2N5/2G |
2 GB |
667 |
Non-ECC |
DS x 8 |
BSME1620828 |
Elpida E1108ACBG-6E-E |
| Micron* MT16HTF6464AY-667BS |
512 MB |
667 |
Non-ECC |
DS x 8 |
0523 |
Micron 5KB42D9DPN |
| Micron MT4HTF6464AY-800G1 |
512 MB |
800 |
Non-ECC |
SS x 16 |
0849 |
Micron MT47H64M16HR-25E ES:G |
| Micron MT8HTF12864AY-800G1 |
1 GB |
800 |
Non-ECC |
SS x 8 |
0840 |
Micron MT47H128M8HQ-25:G |
| Micron MT16HTF25664AY-800G1 |
2 GB |
800 |
Non-ECC |
DS x 8 |
0847 |
Micron MT47H128M8HQ-25:G |
| Nanya* NT512T64U88A1BY-3C |
512 MB |
667 |
Non-ECC |
SS x 8 |
0536 |
Nanya NT5TU64M8AE-3C |
| Samsung* M378T2953EZ3 |
1 GB |
800 |
Non-ECC |
DS x 8 |
0727 |
K4T51083QE |
| Samsung M378T3354CZ3-CE6 |
256 MB |
667 |
Non-ECC |
SS x 4 |
0522 |
Samsung K41511630C-ZCE6 |
| Samsung M378T5663QZ3-CF7 |
2 GB |
800 |
Non-ECC |
DS x 8 |
0807 |
K4T1G084QQ | |
This applies to:
|