|
System Memory Features
The board has four DIMM sockets and supports the following memory features:
- Four independent memory channels with interleaved mode support
- Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8 organization and single-sided DIMMs with x16 organization
- 16 GB maximum total system memory (with 2 Gb memory technology).
- Minimum total system memory: 512MB using 1 Gb x16 module
- Serial Presence Detect
- DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs
To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.
Supported Memory Configurations
| DIMM Capacity |
Configuration |
SDRAM Density |
SDRAM Organization Front-side/Back-side |
Number of SDRAM Devices |
| 512 MB |
Single sided |
1 Gbit |
1 Gb x 16 / empty |
4 |
| 1 GB |
Single sided |
1 Gbit |
1 Gb x 8 / empty |
8 |
| 2 GB |
Double sided |
1 Gbit |
1 Gb x 8 / 1 Gb x 8 |
16 |
| 2 GB |
Single sided |
2 Gbit |
2 Gb x 8 / empty |
8 |
| 4 GB |
Double sided |
2 Gbit |
2 Gb x 8 / 2 Gb x 8 |
16 | |
This applies to:
| 
